HCO MB500 User Manual
Page 10
Page | 9
Set camera STOP time using arrows and push OK to set
2.
Push LEFT arrow button to return to menu
Note: For 24 hour activity: START: 00:00 and STOP 23:59
TIME LAPSE
This feature allows the camera to take pictures at a pre-set time interval (10 seconds to
60 minutes) and record or send them over the network.
1.
Select TIME LAPSE
2.
Select ENABLE to set up time lapse or DISABLE to cancel time lapse
3.
Set START TIME and push OK to set
4.
Set END TIME and push OK to set
5.
Set DELAY TIME and push OK to set
6.
Push LEFT arrow button to return to menu
DEFAULT SET
This feature resets the camera to factory default settings.
II. GSM SETUP
This menu is for setting up the cellular network. GSM setup can be accomplished either
by using the Download Tool on a computer (for comprehensive settings) or by direct
setup on camera (for quick and basic settings).
Using Download Tool to set up GSM
1.
Insert a SD card and a SIM card into camera
2.
Access GSM SETUP from Main Menu and select DOWNLOAD TOOL
3.
Press OK to download the "Uway_GSM_SETUP.zip" onto the SD card
4.
Use a computer to unzip the ZIP file, and then edit the "GSM_SETUP.exe" file