HCO MB500 - Manual (Page 8)

Page | 7
QUIET TIME
Also known as, “Time Interval or Delay Time”, this feature puts the camera to sleep after
capturing an image for the selected period of time before it can be re-activated by motion.
Times vary from 5 seconds to 60 minutes.
1. Select QUIET TIME
2.
Select desired ‘quiet time’ and push OK to set
ILLUMINATION
This feature allows the user to use external lighting (XtendIR-B) or turn off IR lights if no
lights are required in the night. User selects Internal when they want the IR lights of
camera to work normally; select External if connecting XtendIR-B (sold separately) to the
camera OR to turn IR lights OFF at night, and Int + Ext if both the XtendIR-B and camera
IR lights are desired.
1. Select ILLUMINATION
2. Select Internal, External, or Internal + External and push OK to set
DATE / TIME STAMP
This allows the user to have the date, time, and temperature stamped onto each photo or
video.
1. Select TIME STAMP
2. Select NO or YES and push OK to set
SET DATE / TIME
This feature allows the user to set the display format for date and time, as well as set the
current date and time.
1. Select SET DATE / TIME
2. Select one of the three menu options:
3. Push LEFT arrow button to return to menu when finished
DATE FORMAT

Select the desired Date Format and push OK to set
TIME FORMAT

Select desired Time Format and push OK to set
SET DATE / TIME

Set date and time using UP, DOWN, RIGHT and LEFT arrow and push OK to set