HCO MB500 - Manual (Page 9)

Page | 8
ACCESS CONTROL
This feature allows the user to set a 4-digit password to deter theft and render the
camera unusable without the password.
Select ACCESS CONTROL
SET PASSWORD

Select desired password using ARROWS and push OK to set
DISABLE PASSWORD

Select and push OK to disable password
POWER TYPE
This camera is a precisely tuned instrument. It is recommended to use high quality
Alkaline, Lithium or high quality NiMH batteries. Programming which batteries are present
increases accuracy of battery level meter. This camera can also be connected to a 6V or
9V external battery pack (sold separately).
1. Select POWER TYPE
2. Select Lithium/Alkaline, NiMH batteries, DC 6V or DC 9V and push OK to set
FORMATTING SD CARD
Formatting the SD card removes all files on the memory card and prepares it for use in
the camera. It is recommended that the SD card is formatted in the camera prior to each
use.
1. Select FORMAT
2. Select YES to format SD card
3. Push OK to proceed with formatting SD card
TEMPERATURE
Allows the user to select either Fahrenheit or Celsius temperature settings.
1. Select TEMPERATURE
2. Select Fahrenheit or Celsius and push OK to set
DUTY TIME
This feature allows the user to program the camera to turn ON and OFF at a specified
time.
1. Select DUTY TIME
SET START TIME
Set camera START time using arrows and push OK to set
SET STOP TIME