HCO MB500 - Manual (Page 18)

Page | 17
Note 1: The command protocol must be followed accurately; otherwise, the camera will
not accept the command.
Note 2: Once the Send Mode is changed to OFF, the GSM module will be turned off and
will not receive any further text message commands; you will need to retrieve the camera
to turn cellular mode back ON.
G. Camera Name:
User can input a camera name; the camera name will be shown on the top-right corner of
each picture taken.
Note: only "A-Z, 0~9, /, _, -, #" are allowed, DO NOT use Space between words. For
example, "Camera 01" is not eligible, "Camera_01" is eligible.
H. GPS Input:
User can input a GPS coordinate read from a third-party device such as a cellphone or a
GPS device. Once a GPS coordinate is input, the GPS information will be written in the
exif data of each picture taken. User can organize pictures using a third-party software to
track the picture locations.
I.
PATH
Save the edited "GSM_SETUP.exe" after completing all information above. Click the
"Save" button and a file named "GSM.bin" will be generated in the designated location.
Copy the "GSM.bin" file onto the ROOT directory of a SD card (not in DCIM) and insert
the SD card into the camera.
NOTE: Switch the camera to "SETUP" and after a few seconds, the camera will display
"GSM update success".
Testing the GSM network using
“manually send mode”:
1. Switch camera to "SET UP"