Sound Devices 702T - Manual (Page 13)

702T User Guide and Technical Information
11
LCD Display Descriptions
1
8 7
6
5
4 2 3
9 10
11
1) Battery Level Indicator
Shows the voltage level of either the re-
movable Li-ion battery or external pow-
er sources. External power overrides
battery power when present. Graphical
bar for relative level and numeric indica-
tor for precise voltage measurement.
2) File Name Display
Shows the file name actively being re-
corded or played back. In playback-stop
mode, a flashing file name indicates that
the fast-forward and rewind buttons can
be used to step through files in the cur-
rent playback folder.
3) Absolute Time (A-time) Display
Shows the elapsed time of the file be-
ing recorded or played back in hours,
minutes, seconds, and tenths. The A-
time and the time code display can be
exchanged if a large time code display
is needed. This display can be set to re-
verse or flash during recording. Flashes
in playback-pause mode.
4) Time & Date Display
Alternating display between the set date
and time of the 702T. This information is
written as the creation and modification
date for recorded sound files.
5) Bit Depth Indicator
Shows the set record bit depth. In play-
back, shows the file bit depth.
6) Sampling Rate Indicator
Shows the set record sampling rate. In
playback shows the file sampling rate.
7) Time Code Rate
Shows the set time code frame rate. If
a sound file has time code information,
the playback frame rate is shown. If
external time code is connected and the
external rate differs from the rate set
internally, the time code rate will flash.
8) Headphone Source Display
Indicates the source for headphone out-
put. Sources and selection order are user
selectable in the Setup Menu.
9) Time Code Display
In stop and record, shows the time
code generated or received by the 702T.
In play mode, the display shows the
played file’s time code information (if
available). If non-time code files are
playing, the display shows dashes. The
time code display can be exchanged
with the A-time display from a Setup
Menu selection.
10) External Media Space Status
Bar graph indicates amount of record
time remaining on external FireWire me-
dia. Numbers show time in hours and
minutes based on the presently selected
number of record tracks, sample fre-
quency, bit rate, and file type.
11) CompactFlash Status
Bar graph indicates amount of record
time remaining on the inserted Com-
pactFlash card. Time remaining is
shown in hours and minutes based on
the presently selected number of record
tracks, sampling rate, bit depth, and file
type.
For both media types, an asterisk in front of the media indicates that it is selected for recording. High-
lighted volume indicates media selected for record monitoring, playback or file folder display.