Sound Devices 702T - Manual (Page 70)

702T User Guide and Technical Information
68
v. 2.67 Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.
# Setup Name Setup Description Setup Options
42 Time Code: Mode Sets the mode for the time code generator • Off – time code not active, recorded or output
• Free Run – time code is initialized from the jam
menu and then runs continuously regardless of
record mode
• Free Run Jam Once – time code is initialized from
an external source and updates itself to the external
source when reconnected
• Record Run – time code is initially set from the jam
value item in the jam menu. Time code generation
runs only during recording generating continuous
time code from file to file.
• 24 Hr Run – time code is initialized from the system
clock on startup and enters free run mode. Time
code is updated if the time of day clock is adjusted.
• Ext TC – applies external time code to the recorder
directly. The internal time code generator has no
effect.
• Ext TC/cont – applies external time code to the
recorder; internal generator continues to run if time
code signal is lost. Useful for time code transmission
over RF
• Ext TC-Auto Record – applies external time code
to the recorder. Unit enters Record when time code
runs and stops when time code stops.
• Ext TC/cont-Auto Record – applies external time
code to the recorder; internal generator continues
to run if time code signal is lost. Unit enters Record
when time code runs and stops when time code
stops.
43 Time Code: Hold Off Sets the duration that a valid time code signal
has to be recognized by the 702T before
generating a new take while in Ext TC-Auto
Record and Ext TC/cont-Auto Record modes.
0.0 to 8.0 seconds adjustable in increments of .1
seconds
44 Time Code: User Bits Sets the time code user bits generated by the
702T.
mm – month
dd – day of week
yy – year
tt – take number
uu – user-defined
• Not Used – user bits are not set or output
• mm:dd:yy.tt
• dd:mm:yy.tt
• uu:uu:tt:tt – user bits are set to 4 user definable
digits with 4 take digits
• uu:uu:uu:uu
• tt:tt:tt.tt – user bits are set to the take counter for
all 8 digits
• mm:dd:yy:uu
• dd:mm:yy:uu
45 Time Code: Jam Menu Allows the user to jam or edit the internal time
code generator and user bits. (Also accessible
by pressing HDD and Menu keys simultane-
ously).
• Jam RX TC – jams the internal generator to
received external code
• Jam Zeros – resets the internal generator to zero
• Jam Value – sets the internal generator to the value
set in edit value
• Edit Value – allows to user to enter a free-form
number to initialize the time code
• Edit U-Bit – allows the user to edit allowed user bit
numbers
46 Time Code: Display Mode Sets the numbers of the large numerical
display.
• Big A-time
• Big time code