Sound Devices 702T - Manual (Page 67)

702T User Guide and Technical Information
65
Setup Menu
The chart below describes the available setting for the 702T.
# Setup Name Setup Description Setup Options
1 Quick Setup Allows the user to quickly apply default menu
setups and save/retrieve user setups to disk
or CF.
• Load Factory Settings
- restores the factory default settings
• Load Film Settings
- applies typical setups for film production
• Load Reporter Settings
- applies typical setups for voice recording
• Load Music Settings
- applies typical setups for music recording
• Load User from CF
- applies settings saved by user to CF
• Save User to CF
- saves present state to file on CF
2 FireWire: Connection Activates FireWire drive mode. • Computer/Connect (STOP+HDD buttons)
• External Drive
3 Rec: Sample Rate Sets the audio sampling frequency of the 702T • 32 kHz
• 44.1 kHz
• 47.952 kHz
• 47.952k F
• 48 kHz
• 48.048 kHz
• 48.048k F • 88.2 kHz
• 96 kHz
• 96.096 kHz
• 96.096 k F
• 176.4 kHz
• 192 kHz
4 Rec: Bit Depth Sets the bit depth of the 702T recordings. • 16 bit,
• 24 bit
5 Rec: File Type Selects the file format (type) recorded to the
selected medium.
• .wav poly
• .wav mono
• .flac
• .MP3 32 kb/s
• .MP3 64 kb/s
• .MP3 96 kb/s
• .MP3 128 kb/s
• .MP3 160 kb/s
• .MP3 192 kb/s
• .MP3 256 kb/s • .MP3 320 kb/s
• .MP2 64 kb/s
• .MP2 96 kb/s
• .MP2 128 kb/s
• .MP2 160 kb/s
• .MP2 192 kb/s
• .MP2 256 kb/s
• .MP2 320 kb/s
• .MP2 384 kb/s
6 Rec: Media Select Selects the storage media used for recording.
Media is selectable even if it is not present.
• CF Only
• EXHDD Only
• EXHDD and CF
7 Rec: Scene Name/Number User-defined, alpha-numeric file scene names
can be pre-set and selected from a list. Scene
name lists can be saved to hard drive.
<up to 9 alpha-numeric characters can be entered for
the scene name>
Scene name can also be left blank
8 Rec: Track Names used to identify a track name which shows up
in iXML and BWF metadata
• Track A
• Track B
• Track C
• Track D • Mix
• Boom
• <Add New Entry>
• <Load List From CF>
• <Save List From CF>
9 Rec: Take Name/Number Numeric, auto-incrementing number used for
take identification.
<selectable alpha character + integers up to 32000,
with or without preceding 0’s>
10 Rec: Take Reset Mode Defines when take numbers are reset. Reset
brings take number to <1>.
• Never
- take numbers do not reset
• When scene is changed
- take resets when scene name is changed
• When daily folder changes
- takes reset on new day
• Either scene or daily
- takes reset on either change