Sound Devices 702T - Manual (Page 20)

702T User Guide and Technical Information
18
v. 2.67 Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.
Switch is pressed or or the check mark is selected. The amount of delay available is dependent on the
sampling frequency in use.
Sample Frequency Maximum Amount of Delay Available (per input)
32, 44.1, 47.952, 48, 48.048 kHz 30 mS
88.2, 96, 96.096 kHz 15 mS
176.4, 192 kHz 7.5 mS
Input delay can be useful for time aligning input signals from differing sources. For example, digital
wireless mics that have a processing delay in their outputs. In addition, all digital conversion stages
have delay.
Input-to-Track Routing
The 702T uses a flexible routing scheme to assign inputs and tracks for recording. The input matrix
allows any input to be routed to any recording track. Multiple inputs can be routed to a single track
to create mono-mixed recordings.
The 2-by-2 blue LED matrix makes it easy to view the set routing. A solid blue LED indicates an
input is assigned to a record track.
inputs can be routed
to tracks in any of
sixteen possible
combinations
Pressing the INPUT key brings up the following menu.
Routing
Hold down the STOP button then press the INPUT button to cycle through the four preset
input-to-track routing combinations. These presets are factory set and cannot be changed. The last
three preset selections are CUSTOM ROUTE options. Press the EDIT soft button to enter the custom rout-
ing menu. Custom routing allows any input to be assigned to any record track. In the menu, high-
lighted input and track combination are displayed in white text. The two inputs are shown on the
left; the two record tracks are shown on the right.
To assign custom input routings:
1. Press and hold the Stop button, then press the INPUT button successively until INPUT ROUTING is
displayed in the LCD display.
2. Use either the soft buttons for up and down or the Rotary switch to select CUSTOM ROUTING.Press the
EDIT soft button ( ).