Sound Devices 702T - Manual (Page 72)

702T User Guide and Technical Information
70
v. 2.67 Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.
# Setup Name Setup Description Setup Options
65 HP: Monitor Modes Select the sequence of the modes that appear
in the Headphone Source Display on the LCD.
Up to 20 source selections can be entered in any
order. See headphone monitor section in guide
for adjustment and Favorite Mode below for list of
headphone selections.
66 HP: Favorite Mode Selects the audio source monitored when the
Rotary Switch is pressed during recording or
playback.
Inputs 1,2
Tracks A,B
Monitor A,B
Input 1,1
Input 2,2
Track A,A
Track B,B
Monitor A,A
Monitor B,B
Inputs 1,2 (MS)
Tracks A,B (MS)
Tracks A,B (MS)
Inputs 1+2,1+2
Tracks A+B,A+B
67 HP: Playback Mode Selects the audio source sent to headphones
upon playback.
• No change
• Same as options listed above
68 HP: Warning Bell Level Set the output level of the multi-function warn-
ing bell.
Off, -60 to –12 dBFS in 1 dB steps
69 HP: Rec/Stop Bell Alerts the user with one beep at the start of
recording and two beeps when the recording
is stopped
• Disabled
• Enabled
70 Tone: Level Set the output level of the reference tone -40 to 0 dBFS in 1 dB steps
71 Tone: Frequency Allows the user to set the frequency of the
reference tone oscillator
100–10,000 Hz in 10 Hz steps
72 Tone: Mode Select the destination of the reference tone or
to disables it completely
• disabled
• to record tracks only
• to outputs only
• to record tracks and outputs
73 Tone: Record Lock Sets the Tone key to be either available or
locked while in Record Mode.
• Enabled While Recording
• Locked While Recording
74 Drive: Speed Tests Performs a speed test on the CompactFlash
media installed and external drives. Data
transfer speed is measured in KB/s.
Caution: Drive test will disable processing and mute
outputs for duration of test. Outputs will not return
until test is exited.
75 CF: Space Shows the drive file system, total size, and
space remaining on connected CompactFlash
medium.
76 CF: Erase / Format Formats installed CompactFlash medium
Caution, while various PC utilities are able to
recover files from re-formatted drives, once
formatted, old audio data is not accessible by
the 702T.
77 CF: Empty Trash Allows user to delete files previously sent to
the trash as well as false takes.
• Empty Trash
• Empty False Takes
• Empty both
78 EXHDD: Space Shows the drive file system, total size, and
space remaining on connected Compact Flash
medium.
79 EXHDD: Erase / Format Formats attached FireWire storage volume
Caution, while various PC utilities are able to
recover files from re-formatted drives, once
formatted, old audio data is not accessible by
the 702T.