Sound Devices 702T - Manual (Page 16)

702T User Guide and Technical Information
14
v. 2.67 Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.
Right Panel Connectors and Controls
702T
1
8 7 6 5
4 3 2
1) Time Code Multi-Pin
Time code input and output on 5-pin
LEMO ® connector.
2) AES3id Input 1/2
Unbalanced digital input accepts two
channel AES3id (or S/PDIF) on BNC
connectors. Supports sample rates up to
200 kHz.
3) FireWire (IEEE-1394) Port
Connection to a computer (Mac OS,
Windows 2k/XP, Vista, Linux) to access
the CompactFlash volume as a mass
storage devices. Also used to attach ex-
ternal FAT32-formatted FireWire drives
to the 702T for direct recording and
copying.
4) C. Link In/Out
RS-232 protocol interface on 6-pin
modular (“RJ-12”) connector for link-
ing multiple 7-Series recorders together.
Word clock, machine transport, and time
code are carried on the C. Link connec-
tor. Additionally, C. Link accessories
connect through this connector.
5) External DC In
Accepts power sources of 10–18 volts
DC for unit powering and removable
Li-ion battery charging. The Hirose
4-pin connector is wired pin-1 negative
( - ), pin-4 positive (+). Pin-2 ( - ) and pin-3
(+) are used to charge the removable
Li-ion battery. DC ground at both pins-1
and 2 is at the same potential as chassis
and signal ground.
6) Word Clock Input and Out
Provides clock input and output for the
702T. Word input accepts sampling rates
from 32 kHz to 192 kHz. Word clock out-
put is the rate that box is running. There
is no sample rate conversion onboard
the 702T.
7) AES3id Master Output Bus
Unbalanced digital output, two-channel,
for the Master Output Bus. Signal source
is menu-selected and is identical to the
Analog Master Output Bus signal.
8) Rotary Switch
In record and playback modes, selects
the headphone monitor source; push
action is user selectable. When in the
Setup Menu, the Rotary Switch moves
between menu selections; push to select
or enter data.