Tweco 300 Ultra-Cut - Manual (Page 58)

Manual No. 0-4819 Ultra-Cut 300 3-34 INSTALLATION
3. Connect the gas supply lines and the control cable connector from the Gas Control Module to the Valve Kit as
shown. Hold the check valves stationary while attaching the gas lines. (XTL shown)
Control Cable
Plasma Gas Inlet
Shield Gas Inlet
Preflow Gas Inlet
WMS™ Inlet
Art # A-07646
Exhaust Muffler
CAUTION
Hold all fittings stationary while attaching hoses or leaks can be created. Side pressure can break the
check valves or weaken their connection to the torch valve assembly. All fittings must be checked for
leaks after assembly.