Tweco 251 Thermal Arc Fabricator - Manual (Page 21)

FABRICATOR 251
Manual No. 0-4847 2-5 INTRODUCTION
2.10 Included Items
Factory Fitted Wheeling Kit Y
Factory Fitted Dual Cylinder Rack Y
Factory Fitted Primary Power Cable 8AWG, 10ft (3m) with Plug
NEMA 6-50P
Y
Work Lead 10ft (3m) Y
Cable Stowage Hooks Y
Regulator/Flow Meter – Argon Mix Gases Y
Tweco Weldskill MIG Gun 280 Amp, 15ft (4.5m) Y
Fitted Feed Roll for .035” - .045” (0.9 – 1.2mm) solid wire Y
Fabricator 251 Package System Contents
Table 2-5: Power Supply Contents
2.11 Optional Accessories
Refer to the Appendix section of this manual for the list of available options and accessories.