Tweco QFW600 - Manual (Page 8)

quick fixed automation direct plug torches
1-4 SM-QFDP
intRoDuction AnD DeScRiPtion
2.01 How to Use this Manual
To ensure safe operation, read the entire manual, including
the chapters on safety instructions and warnings.
Throughout this manual, the words WARNING, CAUTION,
and NOTE may appear. Pay particular attention to the
information provided under these headings. These special
annotations are easily recognized as follows:
WARNING
A WARNING giveS inFoRMAtion RegARDing
PoSSible PeRSonAl inJuRy.
CAUTION
A CAUTION refers to possible equipment
damage.
NOTE
A NOTE offers helpful information concerning
certain operating procedures.
2.02 Receipt of Equipment
When you receive the equipment, check it against the
invoice to make sure it is complete and inspect the
equipment for possible damage due to shipping. If there is
any damage, notify the carrier immediately to file a claim.
Furnish complete information concerning damage claims
or shipping errors to the location in your area listed in the
inside back cover of this manual. Include a full description
of the parts in error.
If you want additional or replacement copies of this CD,
please contact Tweco ® Robotics at the address and phone
number in your area listed on the inside back cover of this
manual. Include the Manual number (from page i) and
CD part number: 64-2601.
!
SECTION 2:
INTRODUCTION AND DESCRIPTION
2.03 Introduction
The Tweco ® Robotics Quick Fixed Automation Direct Plug
Torch series are offered in air-cooled and water-cooled
assemblies that accept the QTR and QTRW series robotic
conductor tubes.
Standard Features
Quick conductor tube lock for easy conductor tube
replacement.
Water-cooled torch body with built in water shut-off
valves.
Quick hose connections.
Internal purge hose for spraying anti-spatter through
the conductor tube and nozzle.
All assemblies are furnished with a Tweco ® , Miller ® ,
and Lincoln ® rear connector plug.
QFA — Air-cooled Torch Assembly
The air-cooled assembly uses the QTR66 robotic air-
cooled conductor tubes and is rated at 600 amperes @
60% duty cycle.
QFW — Water-cooled Torch Assembly
The water-cooled assembly uses the QTRW63, QTRW64,
or QTRW66 water-cooled conductor tubes and is rated at
600 amperes @ 100% duty cycle.
A wide variety of conductor tube and front-end consumables
are also offered. Contact your local welding distributor and
or Tweco Customer Service Department (1-800-426-1888)
for assistance in choosing the correct conductor tube and
consumables for your welding application.
•
•
•
•
•