Viking Pump TSM350 HG-08/HG-10 Helical Gear Pumps - Manual (Page 10)

TECHNICAL SERVICE
MANUAL
VIKING PUMP, INC. • A Unit of IDEX Corporation • www.vikingpump.com
SECTION TSM 350
PAGE
10 OF 10
ISSUE A
© 10/2012 Viking Pump Inc.
All rights reserved
WARRANTY
Viking warrants all products manufactured by it to be
free from defects in workmanship or material for a period
of one (1) year from date of startup, provided that in no
event shall this warranty extend more than eighteen (18)
months from the date of shipment from Viking. If, during
said warranty period, any products sold by Viking prove to
be defective in workmanship or material under normal use
and service, and if such products are returned to Viking’s
factory at Cedar Falls, Iowa, transportation charges
prepaid, and if the products are found by Viking to be
defective in workmanship or material, they will be replaced
or repaired free of charge, FOB. Cedar Falls, Iowa.
Viking assumes no liability for consequential damages
of any kind and the purchaser by acceptance of delivery
assumes all liability for the consequences of the use or
misuse of Viking products by the purchaser, his employees
or others. Viking will assume no field expense for service
or parts unless authorized by it in advance.
Equipment and accessories purchased by Viking from
outside sources which are incorporated into any Viking
product are warranted only to the extent of and by the
original manufacturer’s warranty or guarantee, if any.
THIS IS VIKING’S SOLE WARRANTY AND IS IN
LIEU OF ALL OTHER WARRANTIES, EXPRESSED
OR IMPLIED, WHICH ARE HEREBY EXCLUDED,
INCLUDING IN PARTICULAR ALL WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. No officer or employee of IDEX Corporation or
Viking Pump, Inc.. is authorized to alter this warranty.
INSTALLATION, START UP, TROUBLESHOOTING,
PREVENTIVE MAINTENANCE, DO’S & DON’TS
SERIES HG-08 & HG-10 HELICAL GEAR PUMPS