Viking Pump TSM685.2: AS-KKE 855 - Manual (Page 5)

SECTION TSM 685.2 ISSUE F PAGE 5 OF 16
EXPLODED VIEW – SIZES AS, AK, AL, KE & KKE MAG DRIVE PUMPS
FIGURE 6
ITEM NAME OF PART ITEM NAME OF PART ITEM NAME OF PART
1 Locknut 36 Rotor and Shaft Assembly 46 Capscrews (metric) for Relief Valve - 6 Req’d
21 Set Collar 37 Idler 47 Relief Valve
25 Casing Bushing 38 Idler Bushing 53 Locating Pin
30 Pipe Plug - 2 Req’d 39 Idler Pin 60 Thrust Washer - 2 Req’d
32 Casing and Bushing Assembly 40 Head and Idler Pin Assembly 61 Machine Screws (metric) - 2 Req’d
33 Casing Stem O-ring 43 Capscrews (metric) for Head - 6 Req’d 62 Drive Key
35 Head O-ring 45 Relief Valve Gaskets - 2 Req’d 63 Shims for Head (metal)
TABLE 2
FIGURE 5
MODEL NUMBER SYSTEM
AS 8 5 5 M B-MD2 B14 B
Series
Material
5 = Cast Iron
Port Design
M= DIN
U= ANSI
Magnetic Coupling Size and
Torque Specification - Drive
Related
A 4 and 9 Ft-Lbs
B 14,32 and 50 Ft-Lbs
C 40,90, 135 and 180 Ft-Lbs
Size
(Nominal displacement)
Magnetic Coupling Design
Second generation and not interchangable
with previous design.
Coupling Size - Pump Related
A size = Used on GS, GG, HJ or HL
B size = Used on HJ, HL, AS, AK or AL
C Size = Used on AS, AK, AL, KE, or KKE
Drive Configurations
M = Motor, Face Mount
D = Direct Drive, Base Mounted
B = Bearing Carrier
R = Viking Reducer Drive
P = Commercial Reducer Drive
GS
GG
HJ
HL
AS
AK
AL
KE
KKE