Vixen Sphinx SXP - Manual (Page 19)

Connecting to the Mount
CAUTION
* Hold the connector part of the STAR BOOK cable securely and pull it straight when you unplug the cable. Unplugging by grabbing the cable
part may cause a wire to break.
* Avoid pulling or bending a part of the cable adjacent to the connectors. It may cause a wire to snap.
* Never connect the STAR BOOK cable to other equipment such as a PC. It may cause failure, fire or electrical shock. (The STAR BOOK cable
does not meet the RS232C specifications.)
CAUTION
* When you unplug the power cable, be sure to hold the connector part and pull it straight. Unplugging by grabbing the cable part may cause a
wire to snap.
* Avoid pulling or bending a part of the cable adjacent to the connectors. It may cause a wire to snap.
* Do not use the power cable in a folded and tied condition. It may cause electrical shock or fire.
Specifications:
DC12V EIAJ RC5320A
Class4 center positive (+)
1
2
Chapter 1 PREPARATION
. Connecting the STAR BOOK Cable Ⅶ
Plug one end of the STAR BOOK cable, where no ferrite core is
attached, into the connecting port on the mount for the controller
cable.
Secure the connector with the setscrews.
. Connecting the Power Cable Ⅷ
Connecting to the STAR BOOK TEN
1
2
Plug the other end of the STAR BOOK cable, where the ferrite core is attached, into the connecting
port on the STAR BOOK TEN for the controller cable.
Secure the connector with the setscrews.
2 2 1 1
Use an optional AC Adapter 12V-3A or portable power supply with
the supplied cigarette-lighter plug cord.
The portable power supply is sold separately.
Confirm that the power switch is turned OFF (i.e. the O mark on the
switch is depressed) before you plug the power cable to the DC12V
input of the mount.
Controller Connecting Port
Setscrews
Controller Connecting Port
Setscrews
19