Vixen Sphinx SXP - Manual (Page 37)

Chapter 4 AUTOMATIC GOTO SLEWING
3
4
Choose "Moon" with the or direction key and press the (or the ) key.
The "Moon Map" dialog box appears and choose "Moon Map" with the or direction keys and press the (or the ) key. If you are in
SCOPE MODE , the "GOTO Message" is displayed. Choose OK and press the key to start the automatic Go-To slewing. The "Moon Map" dialog
box appears on the screen with completion of the automatic slewing.
If you use CHART MODE on the screen, the “SELECT?” dialog box will be displayed. Choose OK and press the key to advance. The
“Moon Map” dialog box appears. Press the key to leave the “Moon Map” menu.
The orientation of the moon is displayed based on the setting in alt-azimuth or RA-DEC. The moon map enclosed with the black frame (frame mode) as
shown below is the default option.
Note: The direction keys are linked to the motor's driving directions in SCOPE MODE .
Using the Moon Map
北
37