Vixen Sphinx SXP - Manual (Page 21)

Chapter 2 INITIAL SETTING
1
2
3
This setting is required the first time you use the STAR BOOK TEN or when the internal battery has been changed. You can enter date and
local time of your area using 24 hours clock, i.e. 3pm is 1500. It does not offset daylight saving time. (The last entered date and time
information will be stored and displayed.)
The time zones are based on longitude bands 15 degrees wide, starting at Greenwich, England. Set the time difference in hours between
your local time and Greenwich Mean Time (GMT). The sign is “+” (plus) if local time is ahead of GMT (east of Greenwich) and “-“ (minus) if
local time is behind GMT (west of Greenwich).
For example, the time zone for Los Angeles (on Pacific Standard Time) is -8 hours.
Please note that the time zone setting is not converted to Daylight Saving time automatically. When you reset your clocks for Daylight
time, add one hour to the value in the Time Zone setting, as in Los Angeles, change the setting from -8 to -7.
Choose “Date Format” in the entry dialog box with the or zoom key (or direction key) and
press the or zoom key (or direction key) and press the key to access the Date
Format. Move the cursor to your desired date format with the or key and press the
key. Then, choose OK with the or key and press the key.
Note: You can also set date and your local time by number with the command keys.
Note: You can always access the Local Time Setting from "System Menu".
Example: Enter date of December 21, 2012 and time of 18h05m:
Move the cursor to the entry space for date and time.
The cursor will move forward automatically as you enter the numbers.
Date formats are available from the following 3 patterns:
Choose "Local Time Setting" in the "Initial Configuration" menu with the or key (zoom key or direction key) and press the (or )
key to access the "Local Time Setting" dialog box.
With the • • • direction keys move the cursor to an available entry space and enter the date and your local time with the
or direction key.
Once you fill in the complete time, the cursor shifts to OK. Press the key to complete the local time setting. Then, press the key
again to come back to the “Initial Configuration” menu.
. Setting Local Time
Time Zone
Ⅲ
2 2 3 3 1 1
21
→ →/ → →/ → → → →/ → →: → in turn and press the key.
Y Y ／ M M ／ D D
M M ／ D D ／ Y Y
D D ／ M M ／ Y Y