Vixen Sphinx SXP - Manual (Page 86)

Chapter 5 APPLICATION
Delete Align Point Data
1
2
3
This allows calling up and deleting your alignment points from a list in the database. You cannot retrieve the deleted alignment point.
This will not function if there is no alignment point.
Following Object
This allows switching OFF or ON the tracking motion of the mount. It is convenient to align the finder scope in the daytime and use for
terrestrial observation.
Keep pressing the key until the dialog box appears (or press the key to access Mount Setting). In “Mount Setting”, choose “Delete
Align Point Data” with the or direction key and press the key (or the key) to call up the dialog box.
Move the cursor with the or direction key to the data you want to delete.
Press the key to call up the dialog box and press the key to delete.
1
2
3
In the “Mount Setting” menu, choose “FollowingObject” with the or direction key and press the key (or the key) to call up the
dialog box.
Choose your desired option the or direction key. Press the key to enter and leave the dialog box.
Confirm that the icon at the lower left of the information bar on the bottom of the screen is switched as follows:
1 1 2 2
1 1 2 2
3 3
If you find an alignment star marked in the list, it indicates that no linkage has been made
between the alignment point with mark and the other established alignment points. Delete any
alignment point marked accordingly.
The setting is defaulted to “ON”.
The setting is switched to OFF automatically if the mount is stopped forcedly during the GoTo slewing or the telescope is slewed to the terrestrial
objects registered in the database or the target object is sunk below the horizon. Switch the “Following Object” to ON or slew to a new celestial
target above the horizon.
Following Object : Tracking ON
Tracking OFF
86