Vixen Sphinx SXP - Manual (Page 34)

Chapter 4 AUTOMATIC GOTO SLEWING
4 The Go-To slewing finishes with ringing the chimes. Pressing the key will start slewing
the telescope to the target.
When you call up M42 from “Object Menu” in CHART MODE , the interactive dialog appears
on the screen. Choose OK and then press the key, M42 will appear in the center of the
star chart as the target.
If you choose Cancel with the • or direction key and then press the key, the Go-
To slewing will be discontinued. At the same time the screen changes to
SCOPE MODE and
shows the area of the star chart where the telescope is pointing on its way to the target.
34