Vixen Sphinx SXP - Manual (Page 92)

Chapter 5 APPLICATION
. Updating your STAR BOOK TEN
Ⅴ
Download the program file of updates from Vixen's website to your PC. Connect the STAR BOOK TEN and the PC directly with the LAN crossover cable.
Update Procedure
Download in advance the newest firmware version of the STAR BOOK TEN which is posted on the home page of Vixen's website at
http://www.vixen.co.jp to a directory on the PC.
Directly connect the STAR BOOK TEN and the PC with the LAN crossover cable.
Turn ON the STAR BOOK TEN. Connecting the power supply cord will start up the
STAR BOOK TEN.
Turn ON your PC and set up the OS.
Wait for a period of one minute as the STAR BOOK TEN and PC will automatically acquire information on networking.
At the main menu, choose “About LAN” and press .
Confirm that IP address is indicated as follows: IP Address: 169.254.a.b (a and b are indefinite numbers)
Open Internet Explorer (or your internet browser) and enter the IP address you obtained in the above in the address bar to display an entry
page. The following appears on the screen.
Example:
If the IP address is 169.254.1.1, put http://169.254.1.1 on the address bar.
Note: Change the setting to have the address bar appear if it is hidden on your PC.
CAUTION
* Use the AC adapter 12V 3-A or the same power source you use for the SXP mount.
* Make sure that the PC has a stable power supply for transmission of data.
* You may fail to reboot the STAR BOOK TEN if the power supply is cut during updating. If this is the case, ask your local Vixen dealer for
repair (chargeable to you).
* You may need to alter the network settings in your PC for updating. Be sure to write down the original settings before changing them.
* All the data stored in the memory may be initialized as a result of updating. Write down the current settings, just in case.
CAUTION
* Never disconnect the power supply cord for the STAR BOOK TEN and the LAN cable while the STAR BOOK TEN is in communication
with the PC. This could result in unrecoverable damage.
* The IP address may differ if the STAR BOOK TEN is connected indirectly through a network.
* If the connection to the PC does not finish, the message “Waiting…” will be displayed instead of the IP address. Or, if the connection
ends in failure, the message “Disconnected” will be displayed. If this is the case, wait a little while or make sure that the LAN cable is
connected securely.
1
2
3
4
5
6
7
92