Vixen Sphinx SXP - Manual (Page 81)

Chapter 5 APPLICATION
GOTO Speed
1
2
The maximum speed of automatic Go-To slewing can be chosen from the following 5 levels.
Note: The speed is an approximation and it depends on loaded weight and condition of power source.
Note: Using the or zoom key will increase or decrease by 10 within the range.
In the “Mount Setting” menu, choose “GOTO Speed” with the or direction key and press the key (or the key) to call up the
dialog box.
In the “GOTO Speed” dialog box, choose your
desired value with the or direction key.
Press the ENTER key to save and leave the
dialog box.
The setting is defaulted to “5”.
1 1 2 2
Polar Scope Light
1
2
This allows adjustment of the brightness of the illuminator for the polar axis scope. While looking through the polar axis scope, adjust the
brightness by number with the or direction key so that the reticle of the polar axis scope and Polaris (or 4 reference stars of Octans in
the southern hemisphere) are visible at the same time in the field of view.
In the “Mount Setting” menu, choose “Polar Scope Light” with the or direction key and press the key (or the key) to call up
the dialog box.
In the “Polar Scope Light Brightness” dialog
box, enter your desired option by number
with the or direction key. Then, press
the key twice to save and leave the
dialog box.
The setting is defaulted to “15”
1 1 2 2
5 High
4
3
2
1 Low : 1000x (about 1000 times of sidereal rate)
: 700x (about 700 times of sidereal rate)
: 400x (about 400 times of sidereal rate)
: 200x (about 200 times of sidereal rate)
: 100x (about 100 times of sidereal rate)
20
:
0 : The brightest
: OFF the light
81