Weller WDH 20T - Manual (Page 2)

2-7 WDH 10T / WDH 20T
Thank you for placing your trust in our company by purchasing the
Weller WDH 10T / WDH 20T Switching Tool Stand.
This product meets or exceeds the requirements established by
Weller for superior performance, versatility and quality.
1.
Cautions! / Warnings!
Please read these Operating Instructions and the attached Safety
Information carefully prior to initial operation. Failure to observe the
safety warnings may result in accident, injury, or risk to health.
The manufacturer shall not be liable for damage resulting from
misuse of the machine or unauthorized alterations.
Warning: This product when used for soldering and similar applica-
tions, produces chemicals known to the State of California to cause
cancer and birth defects or other reproductive harm.
Safety Information:
Always place the soldering iron in its original holder
Remove all inflammable objects from the proximity of the hot
soldering tool.
Use suitable protective clothing to prevent the risk of burns asso-
ciated with molten solder.
Never leave a soldering/desoldering tool unattended.
Never work on electrically live circuits or components.
Always wear eye protection when working with soldering and
desoldering applications.
The Weller WDH 10T / WDH 20T Switching Tool Stand corresponds
to the EC Declaration of Conformity in accordance with the basic
safety requirements of Directives 89/336/EEC and 73/23EEC.
1.1 Additional Documents
− Operating Instructions of your control unit including the
accompany booklet on Safety Instructions
− Operating Instructions of your soldering tool
1.2 Intended use
Always use the Switching Tool Stand WDH 10T / WDH 20T
exclusively for placing the listed Sodering Tool, (See Technical Data)
as specified in these Operating Instructions. Specified use of the
Switching Tool Stand WDH 10T / WDH 20T also includes:
−
observance of these Operating Instructions,
− observance of all other accompanying documentation,