Weller WDH 20T - Manual (Page 3)

WDH 10T / WDH 20T 3-7
− observance of the locally applicable accident prevention
regulations.
The manufacturer shall not be liable for damage resulting from
unauthorized alterations to the device.
2 Description
The Weller WDH 10T / WDH 20T Switching Tool Stand, as opposed
to a standard Tool Stand, provides a switching function that is
activated by the soldering station. A microswitch integrated in the
Switching Tool Stand is actuated when the soldering tool is placed in
the holder or removed.
When the Switching Tool Stand is placed into a Digital Weller
Soldering Station the Tool Stand and the Temperature SETBACK
functions are automatically detected.
Several Switching Tool Stands can be connected together at the
side.
Technical Data WDH 10T / WDH 20T
Dimensions L x W x H (inches): 8.189 x 2.56 x 4.53
L x W x H (mm): 208 x 65 x 115
Weight 1.52 lb. ( 0.69 kg )
Matching soldering
tools
WDH 10T: WP80, WSD161,WSD151,
WSP80
WDH 20T: WMP
Compatible
control units
WSD81, WSD161, WDD81V, WSL, WSL2,
WAD101, WMRS, WRS1002, WRS3000,
WD1, WD2, WD1M, WD2M, WR 3M
3 Placing into Operation
WARNING!
•
Risk of burns when working with soldering tools
There is a risk burning if you touch the hot soldering tool.
Z
Always place the soldering iron in the Switching Tool Stand.
1. Carefully unpack the Switching Tool Stand.
2. Ensure that the soldering station to be connected to is off.
3. Insert the 7-pin plug (3) of the Switching Tool Stand connecting
cable at the soldering station tool receptacle and lock it by turning
clockwise slightly.