Weller WD2000M - Manual (Page 12)

1100
TTeecchhnniiccaall SSppeecciiffiiccaattiioonnss
TTeecchhnniiccaall DDaattaa
Supply Voltage:
24 VAC
Power Rating: 40 W
Heat Up Time: 3 sec. from ambient to 750ºF (399ºC)
Max. Temp.: 850ºF (450ºC)
Min. Temp.: 200ºF (100ºC)
Tool Cord: Silicone rubber, burn resistant
Connector: Polarized, 5 pin locking
Tool Weight: Less than 1/2 ounce
Sensor Type: Integrated sensor / heater tip cartridge
Tip Type: RT series
1. Tool holder
2. Ball joint clamping screw
3. Ball joint for setting the tool holder angle
4. Sponge
5. Hand piece connector / plug
6. Soldering iron handle
7. Soldering tip
W WM MRRPP IIrroonn aanndd SSttaanndd