Ssppeecciiaall ffuunnccttiioonnss – Weller WD2000M User Manual

Page 7

Advertising
background image

55

English

°°CC)) temperature symbol flashes..

Next, depress and hold the desired Radio Button 11,, II--IIII--

IIIIII or 22. While the button is depressed, the small display

assigned to the Radio Button also flashes and, after 3
seconds, accepts the value of the large display.
Release the Radio Button.
Setting a Radio Button to a low temperature gives you
the option of manually and quickly decreasing temper-

ature when the soldering iron is not being used.

77.. SSppeecciiaall ffuunnccttiioonnss

The special function are split in two menu sections.
Special functions menu 1: often used functions like
STANDBY, OFFSET, SETBACK, ...
Special functions menu 2: Calibration function, Remote

Id

77..11 SSppeecciiaall ffuunnccttiioonnss m

meennuu 11

Select the desired channel (CH1 or CH2) for inputting
the special functions. If the UUPP and DDOOW

WNN buttons are

pressed simultaneously, after approx. 2 seconds the
menu selection for the special functions is activated
and - II - appears in the display, release buttons.

The following set-

tings are possible:

OFFSET, STANDBY, WINDOW (temperature settings);
SETBACK, OFF (time settings); Lock function (On/Off);
Temperature scale ( °F /°C ).
Radio Buttons 11 and I-II-IIIII are used for menu item
selection.
Radio Button 22 is used to exit the menu.

RReesseettttiinngg tthhee SSttaattiioonn ttoo FFaaccttoorryy SSeettttiinnggss::
Depress and hold Radio Button 22. Then depress the UUPP
and DDOOW

WNN Scroll Keys at the same time. "FFSSEE",

“Factory Setting Enabled” appears in the display. The
soldering station is now reset to its factory default set-
tings.

77..11..11 SSttaannddbbyy TTeem

mppeerraattuurree

When the Setback time has elapsed, the “Set” temper-
ature is decreased automatically to the Standby value.
The “Read” temperature is displayed (flashing) and
"SSTTAANNDDBBYY" appears in the display. The Standby tem-
perature can be set in the range ( 200 - 600°F/100 -
300°C ).

Adjust the standby temperature with the UUPP or DDOOW

WNN

Scroll Keys.
Switch to the previous menu item with Radio Button 11.
Switch to the next menu item with Radio Button I-II-IIIII.

SSTTAANNDDBBYY

OOFFFF

OOFFFFSSEETT

SSEETTBBAACCKK

W

WIINNDDOOW

W

°°CC // °°FF

11 II--IIII--IIIIII 22

EEXXIITT

-1- -2-

2 (EXIT)

4 sec.

2 sec.

Menu Selection

Exit

Advertising
This manual is related to the following products: