LaMotte DO 6 Dissolved Oxygen Meter - Manual (Page 28)

rSt.5 – Enter Reset Menu
A.CAL – Selection of Calibration Reset (Clear only Calibration
and its Data back to factory default condition)
b.USR – Selection of User Reset (Clear all user setting back to
factory default condition)
OFS.6 - % Saturation Offset Adjustment (Only available in %
Saturation Set Up menu)
DPr.7 – Enter Barometric Pressure Selection Menu
A.HG – Selection of Barometric Pressure Setting Adjustment in
mmHg
A.PA - Selection of Barometric Pressure Setting Adjustment in
Kilo Pascal
b.SAL – Enter the Salinity Setting Adjustment Menu (Only
available in mg/L (ppm) Concentration Set Up menu)
27
OF5.6
p
Figure 79: Overview of DO 6% Saturation or Temperature Setup Menu
Switch off from % Saturation
or Temperature measurement
mode. Press and hold MODE
key and then switch on.
SEt.P will display for
1 second
MODE
ON
OFF
COF.1
CAL.2
ELE.3 OF5.6
p