LaMotte DO 6 Dissolved Oxygen Meter - Manual (Page 33)

7. Press the HOLD/ENTER key. The display will show “LO.mV”
momentarily before displaying the sensor’s mV output value with respect to
0% Saturation.
8. Press the HOLD/ENTER key again to exit to the main group menu. Press
CAL to return to the measurement mode.
Note: To view the electrode properties in the mg/L (ppm) Concentration
mode, repeat the whole steps above using the mg/L (ppm) Concentration Set
Up menu. Viewing of the % Saturation Offset will be skipped in this menu.
32
HOLD
ENTER
HOLD
ENTER
HOLD
ENTER
HOLD
ENTER
“LO.mV” will display
for 1.5 seconds
“FACT” displays
for 1.5 seconds
“OFS” displays
for 1.5 seconds
“HI.mV” displays
for 1.5 seconds
Viewing of the offset
percentage adjustment will be
available only if set up menu is
selected from the DO%
Saturation of the Temperature
Mode. Otherwise, this menu
will be skipped.
Figure 23: Viewing electrode data sequence
%