Wheatheart Swing Away Flex Auger - Manual (Page 60)

3. A SSEMBLY W HEATHEART - SA F LEX A UGER
3.15. L OW P ROFILE H OPPER 71’ - 111’
60 30651 R5
3.15.1. S
TEERING
A
SSEMBLY
Important: Hoppers can be set up for use on right or left side of auger. Figure 3.44 to 3.48
illustrate the right side as viewed when standing at the hopper looking toward the
spout. Figure 3.49 to 3.52 illustrate the left side as viewed when standing at the
hopper looking toward the spout.
1. Bolt short and long castor arms to hopper with four 3/8” x 1” bolts and 3/8”
flange nuts for each arm (Figure 3.45 and 3.46).
2. Insert steering shaft and motor castors through bearings on each castor arm.
Figure 3.44 Right Side Setup
Figure
3.45
Figure
3.46
Figure
3.47