Wheatheart WHR 130 x 51-71ft Augers PTO - Manual (Page 13)

WHEATHEART - GHR & WHR GRAIN AUGERS 2. S AFETY F IRST
GRAIN AUGERS SD 2.9. S AFETY D ECALS
30662 R1 13
• Do not modify any auger components without authorization from WHEAT-
HEART. Modification can be dangerous and result in serious injuries.
2.9. SAFETY DECALS
• Keep safety decals clean and legible at all times.
• Replace safety decals that are missing or have become illegible. See decal
location figures that follow.
• Replaced parts must display the same decal(s) as the original part.
• Safety decals are available from your distributor, dealer, or factory.
2.9.1. D ECAL I NSTALLATION
1. Decal area must be clean and dry, with a temperature above 50°F (10°C).
2. Decide on the exact position before you remove the backing paper.
3. Align
the decal over the specified area and carefully press the small portion
with the exposed sticky backing in place.
4. Slowly peel back the remaining paper and carefully smooth the remaining
portion of the decal in place.
5. Small air pockets can be pierced with a pin and smoothed out using the sign
backing paper.
2.9.2. S AFETY D ECAL L OCATIONS
Replicas of the safety decals that are attached to the equipment are shown in the
figure(s) that follow. Proper safety procedures require that you familiarize
yourself with the various safety decals and the areas or particular functions that
the decals apply to as well as the safety precautions that must be taken to avoid
serious injury, death, or damage.
* WHEATHEART reserves the right to update safety decals without notice.
Safety decals may not be exactly as shown.