Wheatheart R Series Augers - Manual (Page 15)

W HEATHEART - R S ERIES A UGERS 3. T RANSPORT
R8-36, R8-41, R8-46, R8-51, R10-36, R10-41, & R10-51
30758 R1 15
3. Transport
W HEN T RANSPORTING :
To reduce the risk of injury or death to people using this equipment, follow basic
safety precautions:
• Ensure tires are inflated to the tire manufacturers’ recommended pressure.
• Check with local authorities regarding transportation of agricultural equipment
on public roadways. Obey all applicable laws and regulations.
• Make sure that all lights and reflectors required by law are in place, function-
ing, and can be seen by all overtaking and oncoming traffic.
• Ensure the unit is hitched securely to the towing vehicle.
Warning:
Before continuing, ensure you have read and understand the relevant information
in the safety section. Safety information is provided to help prevent serious injury, death, or
property damage.
DANGER
Electrocution hazard:
• This auger is not insulated.
• Keep auger away from overhead power
lines and devices.
• Electrocution can occur without direct
contact.
• Fully lower auger before moving.
Failure to keep away will result in serious
injury or death.
NOTICE
Empty the auger before transporting. Transporting a full
auger will place excessive loads on the tube assembly,
frame, axle assembly, hitch, and towing unit.
If auger wheels are partially or fully buried in snow or grain,
do not attempt to move auger until snow or grain has been
cleared away from auger wheels.
WARNING
Failure to secure the unit prior to transporting
could cause a serious hazard to the occupants of
the towing vehicle or of other vehicles.