Wheatheart R Series Augers - Manual (Page 16)

3. T RANSPORT W HEATHEART - R S ERIES A UGERS
R8-36, R8-41, R8-46, R8-51, R10-36, R10-41, & R10-51
16 30758 R1
• Display a SMV (slow moving vehicle) emblem when transporting slower than
25 mph (40 km/hr). Never transport faster than road, terrain, or conditions will
allow you to safely.
• Take special care and precautions when transporting during times of limited
visibility such as rain, snow, fog, dusk, or at night. It is recommend that you
wait for a more appropriate time to move.
• Use hazard-warning lights when transporting with a tractor, unless prohibited.
• Keep to the right and yield the right-of-way to allow faster traffic to pass.
• Use caution when turning corners or meeting traffic.
• Be aware of height limiting objects.
• Do not transport the auger on a slope greater than 20°. The auger may over-
turn.
The Wheatheart auger is designed to be easily and conveniently readied for
transport. Follow this procedure when converting the machine from operating to
transport configuration.
1. Make sure work area is clear of any obstructions before lowering.
2. Connect the auger to the towing vehicle and use a retainer to lock the hitch
draw pin in place.
3. Place the belts under tension.
4. Remove all wheel chocks.
5. Lower the auger until the roller track shoe is resting on the down position
stop, and there is slight tension on the lift cable.
6. Lock the winch into place by turning the handle clockwise until 2 clicks are
heard.
7. Place the PTO driveline in the transport saddle and secure (PTO drive only).
WARNING
A vehicle imbalance between the towing
vehicle and the machine could reduce your
vehicle’s stability, handling, and braking
ability, and could lead to an upset or collision.
Transport at a speed that road conditions
allow, to a maximum speed of 20 mph 
(32 km/h)
DANGER
Upending Hazard:
Do not raise auger intake above tow bar
height.
Empty auger and lower fully before moving.
Failure to do so will result in serious injury or
death.