Planter setup, Section 1 assembly and setup – Great Plains PT8030 V1012 Operator Manual User Manual
Page 12
Advertising
10
Section 1 Assembly and Setup
10/10/12
PT6030 and PT8030 Pull-Type Planter 401-032M
Great Plains Mfg., Inc.
Planter Setup
Lift frame as shown.
15059
Attach chain for safety.
Follow these steps for setting the planter in planting posi-
tion:
2.
Lower and back up slowly as shown below.
15061
Section 1
Assembly and Setup
1.
With stands on the ground, back up fork truck. Chain
should become taut.
15060
15062
Block to a level position and remove chain.
15063
Advertising
This manual is related to the following products: