Great Plains PT8030 V1012 Operator Manual - Manual (Page 13)

11
Section 1 Assembly and Setup
PT6030 and PT8030 Pull-Type Planter 401-032M 10/10/12
Great Plains Mfg., Inc.
3. Attach hitch to frame.
15072
4. Install markers.
5. Remove shipping stands and brackets.
Marker Installation
Lower the planter to the planting position. Remove the
frame end cap if applicable.
Refer to Figure 1-1 for hose routing.
Refer to Figure 1-2:
1.
Install the 1st stage arms(#1). Leave arms resting on
the down stops.
2. Install pivot links (#2). Refer to Illustration for proper
orientation.
3. Install the 2nd stage mount, 2nd stage, and the exten-
sion tube (#3, 4, & 5) onto the end of the 1st stage
arms.
Marker Hose Routing
Figure 1-1
15021