Recalibrating insecticide/herbicide meter – Great Plains PT8030 V1012 Operator Manual User Manual
Page 24
Advertising

22
Section 3 Row Unit Operation
10/10/12
PT6030 and PT8030 Pull-Type Planter 401-032M
Great Plains Mfg., Inc.
Recalibrating Insecticide/Herbicide
Meter
If it should ever become necessary to recalibrate the gran-
ular meter on the insecticide/herbicide hopper, proceed as
follows:
1.
Remove and empty hopper and turn hopper upside
down.
2.
Turn hopper knob to “10”. See Figure 3-6.
3.
See Figure 3-7. Loosen screws (#1) in metering gate.
4.
Insert calibration tool (#2).
5.
Readjust dial to “04”.
6.
Slide gate (#3) to tool.
7.
Retighten screws.
8.
Reinstall hoppers, refill and check per previous in-
structions.
Hopper Knob
Figure 3-6
14947
Recalibrating Meter
Figure 3-7
15051
Advertising
This manual is related to the following products: