Great Plains 606NT Operator Manual - Manual (Page 10)

6 3P605NT, 3P606NT, 605NT & 606NT Table of Contents Index Great Plains Manufacturing, Inc.
151-061M Table of Contents Index 2014-02-10
Safety Decals
Safety Reflectors and Decals
Your implement comes equipped with all lights, safety
reflectors and decals in place. They were designed to
help you safely operate your implement.
▲ Read and follow decal directions.
▲ Keep lights in operating condition.
▲ Keep all safety decals clean and legible.
▲ Replace all damaged or missing decals. Order new decals
from your Great Plains dealer. Refer to this section for
proper decal placement.
▲ When ordering new parts or components, also request
corresponding safety decals.
To install new decals:
1. Clean the area on which the decal is to be placed.
2. Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
Reflector: Slow Moving Vehicle (SMV)
At center of walkboard;
1 total
See transport topic on page 20 or page 21.
Reflectors: Red
On rear face of walkboard, left and right ends;
2 total
See transport topic on page 20 or page 21.
818-055C
32693
838-266C
32693