Great Plains 606NT Operator Manual - Manual (Page 57)

2014-02-10 Table of Contents Index 151-061M
Great Plains Manufacturing, Inc. Table of Contents Index 53
Options
Accessories are listed in alphabetical order. To order an
accessory, contact your Great Plains dealer.
Acremeter
An electronic acremeter is standard on Model 3P606NT
and 606NT. If you need a meter with an alternate units of
measure, or have an older drill without an electronic
acremeter, order one of the following parts.
See “Acremeter Operation” on page 26.
Calibration Kits
Field installation kits are available to upgrade drill Model
3P605NT and 605NT. This adds a calibration crank,
allowing operating of the meter shafts without needing to
rotate the gauge wheel tire.
Note: Calibration cranks are standard on Model
3P606NT and 606NT.
Drill Model Units Part Number
3P605NT acres 891-005C
3P605NT hectares 891-006C
3P606NT acres 891-005C
3P606NT hectares 891-006C
605NT acres 891-007C
605NT hectares 891-008C
606NT acres 891-007C
606NT hectares 891-008C
27378
Drill Kit
Part
Number
3P605NT 3P605NT CALIBRATION KIT 152-303A
605NT 605NT CALIBRATION KIT 152-301A
23393