Great Plains 606NT Operator Manual - Manual (Page 30)

26 3P605NT, 3P606NT, 605NT & 606NT Table of Contents Index Great Plains Manufacturing, Inc.
151-061M Table of Contents Index 2014-02-10
Acremeter Operation
An electronic acremeter is standard on Models 3P606NT
and 606NT. It is available as an accessory for Models
3P605NT and 605NT. You may have any of three
different meter styles.
The acremeter counts shaft rotations whenever the shaft
is rotating - this is with the drill lowered and in motion or
during crank operation. The meter is programmed to
display rotations as acres or hectares, when using all
rows, factory-specified tires and tire inflations.
Note: Unusual conditions and/or non-standard row
spacings can cause the acremeter tally to vary
from actual acres planted.
DataTrac Electronic Acremeter
Refer to Figure 22
If you have the circular end-of-shaft acremeter depicted
in Figure 22, see Electronic Acremeter Manual
152-325M.
Great Plains Acre Counter
Refer to Figure 23
If you have the rectangular meter, mounted on the front
face of a tool bar, depicted in Figure 23, see Electronic
Acremeter Manual 194-074M.
2013- Great Plains Electronic Acremeter
Refer to Figure 24
If you have the circular end-of-shaft acremeter depicted
in Figure 24, see Electronic Acremeter Manual
152-314M.
Figure 22
DataTrac Acremeter
34937
Figure 23
GP Acre Counter
34775
Figure 24
2013- Electronic Acremeter
27378