Great Plains 1005NT Assembly Instructions - Manual (Page 6)

4 7ft and 10ft EWNT Small Seeds Great Plains Manufacturing, Inc.
123-535M 06/02/2008
Using This Manual
This manual familiarizes you with safety, assembly, oper-
ation, adjustments and maintenance. Follow the recom-
mendations to help ensure safe and efficient operation.
Definitions
The following terms are used throughout this manual.
Note: Paragraphs in this format provide useful informa-
tion related to the current topic.
IMPORTANT !
Paragraphs in this format present a crucial point of infor-
mation related to the current topic. Read and follow the
directions to: remain safe, avoid serious damage to
equipment and ensure desired field results.
Right-hand and left-hand as
used in this manual are deter-
mined by facing the direction
the machine will travel while in
use unless otherwise stated.
An orientation rose (shown at
right) depicts Up, Right, Back,
Down, Left and Front.
Call-Outs
Owner Assistance
If you need customer service or repair parts, contact a
Great Plains dealer. They have trained personnel, repair
parts and equipment specially designed for Great Plains
products. Your machine’s parts were specially designed
and should only be replaced with Great Plains parts.
Record your small seeds attachment kit model number
here for quick reference:
Model Number:__________________________
Date Purchased: __________________________
Your Great Plains dealer wants you to be satisfied with
your updated machine. If you do not understand any part
of this manual or are not satisfied with the service
received, please take the following actions.
1. Discuss the matter with your dealership service
manager. Make sure they are aware of any problems
so they can assist you.
2. If you are still unsatisfied, seek out the owner or gen-
eral manager of the dealership.
For further assistance write to:
Product Support
Great Plains Mfg. Inc., Service Department
PO Box 5060 Salina, KS 67402-5060
785-823-3276
Figure 2
End Wheel Drill
13844
U
D
F
B
L
R
Single-digit callouts identify components in
the currently referenced Figure or Figures.
These numbers may be reused for different
items from page to page.
to Three-digit callouts in the range 100-232 ref-
erence new parts from lists beginning on
page 26. The descriptions match those on
the parts, cartons, bags or item tags, as well
as descriptions your updated Parts Manual.
U
D
L
R
B
F
1
100 232