Great Plains 2551SC Predelivery Manual - Manual (Page 10)

6 2536-2551SC Table of Contents Index Great Plains Manufacturing, Inc.
540-179Q Table of Contents Index 10/10/2013
Shipping
Refer to Figure 3
• The Seedbed Conditioner will be shipped with reels
attached to frames on shipping stands that will not
need to be returned to Great Plains.
• The hitch will come pre-assembled on all models and
will have to be attached to center frame assembly.
• The hydraulic hoses will be hooked up every where
except for the fold cylinders and the hydraulic system
will have to be charged.
• Spindle, hub, tire and wheel assembly will not be
mounted on torque tube.
• Wings will be detached from center frame but both
wings will have cylinder hooked up and folded and
banded together.
• Carefully remove unit from truck.
• Un-band unit and locate all parts.
Assembly and Setup Assistance
To order additional copies of pre-delivery instructions or
operator.s and parts manuals, write to the following
address. Include model numbers in all correspondence.
If you do not understand any part of this manual or have
any assembly or setup questions, assistance is available.
Contact:
Product Support
Great Plains Mfg. Inc., Service Department
PO Box 5060
Salina, KS 67402-5060
(800)255-9215
Figure 3
Shipping
42814