Great Plains CP1000 Assembly Instructions - Manual (Page 21)

19
Section 4 Maintenance and Lubrication
9/21/05 CPH and CP1000 Coulter Command System 148-258M-B
Great Plains Mfg., Inc.
Maintenance
The Coulter Command is relatively maintenance free.
The switches, sensors, and linkages should not need
any routine adjustment unless they are moved or
damaged.
Lubrication
Lubrication is required every 50 hours of operation. Use a multipurpose spray lube. Use as required.
Do not over lubricate.
Lubrication Symbols
As
Required
Seasonally
50
Lubrication is required Lubrication is required every 10 hours of operation.
10
Axle Bearings
Repack
Type of Lubrication: Wheel Bearing Grease
12620
2 - 3 Years
Section 4
Maintenance and Lubrication