Great Plains CP1000 Assembly Instructions - Manual (Page 4)

2
Introduction
CPH and CP1000 Coulter Command System 148-258M-B 9/21/05
Great Plains Mfg., Inc.
Introduction
This manual applies to the following:
148-260A CPH Coulter Command
148-272A CPH Coulter Command Update
148-260A CP1000 Coulter Command
This manual has been prepared to instruct you in the
safe and efficient operation of your Coulter Command
System. Read and follow all instructions and safety pre-
cautions carefully.
The parts on your Coulter Command have been special-
ly designed and should only be replaced with genuine
Great Plains parts. Therefore, should your Coulter Com-
mand require replacement parts go to your Great Plains
Dealer.
Product Overview
The Coulter Command couples a microprocessor with
electro-hydraulics to provide a state-of-the-art system
for maintaining coulter depth regardless of the terrain or
soil type. It also provides coulter depth adjustment
"From The Tractor Cab". The Coulter Command system
contains a depth sensing wheel, an electronic control
box, a speed sensor, a depth sensor box, a lift control
switch, a wiring harness, a top link, and a hydraulic con-
trol valve. It also uses the tongue cylinder from your
Center Pivot Hitch (CPH) or CP1000.
Using This Manual
For your safety and to help in developing a better under-
standing of your equipment we highly recommend that
you read the operator sections of this manual. Reading
these sections not only provides valuable training but
also familiarizes you with helpful information and its lo-
cation. The parts sections are for reference only and
don’t require cover to cover reading. After reviewing
your manual store it in a dry, easily accessible location
for future reference.
Definitions
The right hand and left hand as used throughout this
manual is determined by facing in the direction the ma-
chine will travel when in use unless otherwise stated.
Important Notice
Great Plains Manufacturing, Inc. provides this publica-
tion “as is” without warranty of any kind, either
expressed or implied, while every precaution has been
taken in the preparation of this manual, Great Plains
Manufacturing, Inc. assumes no responsibility for errors
or omissions. Neither is any liability assumed for damag-
es resulting from the use of the information contained
herein. Great Plains Manufacturing, Inc. reserves the
right to revise and improve its products as it sees fit. This
publication describes the state of this product at the time
of its publication, and may not reflect the product at all
times in the future.
Printed in the United States of America.
For your convenience, record your Serial Number, Mod-
el Number and the Date Purchased in the space
provided below. Have this information before you when
calling a Great Plains Authorized Dealer.
NOTE: Indicates a special point of information
which requires your attention.