Great Plains 1500TM Assembly Manual - Manual (Page 13)

Great Plains Manufacturing, Inc. Assembly 9
12/12/2013 586-535Q-ENG
Center Transport
Refer to Figure 6
12. Slide hub/spindle assemblies into torque tube and
align holes. Secure with 5/16 x 3 1/2, Gr. 8 hex bolts
and 5/16 top lock nut.
13. Attach tire/wheel assembly with 5/8 lug nuts .
14. Tighten all bolts with lock nuts snug, but do not torque.
The rest of the bolts may be tightened to specs, See
“Torque Values Chart” on page 24.
Trusses & Level Bar
Refer to Figure 7
15. Attach hitch trusses
with 3/4 x 2 hex bolt (front
& rear plates), 3/4 x 2 1/2 hex bolt (middle plates),
3/4 lock washers and 3/4 nuts.
16. Install level bar to torque tube with 1 x 9 1/2 pins
, 3/8 x 2 1/4, Gr. 8 hex bolts and 3/8 nylon lock
nut.
17. Install h-bracket assembly to front of level bar
with 3/4 x 2, Gr. 8 hex bolts , 3/4 lock washers and
3/4 nuts.
18. Install bottom of h-bracket assembly to front of
center frame with 1 x 3 1/4 clevis pin , 1.5 x 1.00
x.075 machine washer and 3/16 x 2 cotter pin.
19. Tighten all bolts with lock nuts snug, but do not
torque. The rest of the bolts may be tightened to
specs, See “Torque Values Chart” on page 24.
1
U
D
F
B
L
R
4
Figure 6
Center Transport
42981
3
5
2
4
1 2
3
4 5
1 2
3
4
5 6
7 4
8
7
9
10
U
D
F
B
L
R
5
1
7
4
9
6
2
10
Figure 7
Trusses & Level Bar 42982
1
3
8
2