Great Plains ADI334 Predelivery Manual - Manual (Page 3)

1
Important Safety Information
4/7/04 Models ADI334 and ADI345 Air Drill Implement 160-243M
Great Plains Mfg., Inc.
Important Safety Information
For your safety, thoroughly read “Important Safety Informa-
tion” and “Operating Instructions” in the operator’s manual
before proceeding.
Safety Notations
The SAFETY ALERT SYMBOL indicates there is a potential
hazard to personal safety involved and extra safety precautions
must be taken. When you see this symbol, be alert and carefully
read the message that follows it. In addition to design and con-
figuration of equipment, hazard control and accident preven-
tion are dependent upon the awareness, concern, prudence and
proper training of personnel involved in the operation, trans-
port, maintenance and storage of equipment.
Watch for the following safety notations throughout these in-
structions and the operator’s manual.
!
DANGER!
Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury. This signal word
is limited to the most extreme situations.
!
WARNING!
Indicates a potentially hazardous situation which, if not avoid-
ed, could result in death or serious injury.
!
CAUTION!
Indicates a potentially hazardous situation which, if not avoid-
ed, may result in minor or moderate injury. It may also be used
to alert against unsafe practices.
Safety Rules
Most accidents are the result of negligence, carelessness or
failure to follow safety precautions. Though your implement is
designed with many built-in safety features, safety precautions
are mandatory to prevent accidents.
!