Great Plains 3N4010HDA Operator Manual - Manual (Page 73)

2013-09-24 Table of Contents Index 196-444M
Great Plains Manufacturing, Inc. Table of Contents Index 69
Options
Blockage Detector
The seed monitor supports sensors that monitor for
plugging in the one-inch, secondary hoses. The package
includes programmable blockage modules for each tower
and flow sensors for each secondary seed hose. The
blockage modules signal the monitor when flow stops at
a sensor. The monitor then sounds an alarm and
identifies the problem hose.
To order blockage sensors, contact your Great Plains
dealer.
Coulters
The 3N-4010HDA supports either frame-mounted or
unit-mounted coulters. It is not possible to install both
types on the same drill.
Unit-Mounted Coulters
Unit-mount coulters (UMCs) attach directly to the 10HD
row unit, and the coulter blade maintains a precise
relationship to the opener disk (seeding) depth.
UMCs are suitable for lighter no-till and conventional
tillage conditions. Their down-force is limited to what the
10HD row unit can provide. In challenging conditions,
weight kits may be required.
UMCs are dealer-installed. Order one kit part number
per row. Weight is 40 lbs (18kg) per row.
For operation, see “Unit-Mounted Coulter
Adjustments” on page 42.
15in Coulter Blades
Drill, Row Spacing
Part
Number
3N40HD-6675 DICKEY JOHN BLOCK 168-411A
3N40HD-4810 DICKEY JOHN BLOCK 168-412A
Coulter Kit
Part
Number
GP25S UMC 15" FLUTED BLD 204-616L
GP25S UMC 15" TURBO BLD 204-617L
Blade
Part
Number
COULTER BLADE (FLUTED) 15" OD 820-331C
COULTER BLADE (TURBO) 15" OD 820-327C
16457
Figure 65
10HD Series Unit-Mounted Coulter
22817