Great Plains 3N4010HDA Operator Manual - Manual (Page 75)

Great Plains Manufacturing, Inc. Table of Contents Index Options 71
2013-09-24 Table of Contents Index 196-444M
Hitches
One hitch is selected upon initial order of an
3N-4010HDA Drill, and includes the spring wire loop,
safety chain, and all fasteners. Additional hitches may be
ordered for conversion in the field, and include extra hitch
mounting bolts, lock washers and nuts.
Flat Fold Markers
Hydraulically-operated markers leave a visible groove to
use as centerline for the next pass.
The single marker mounts on the left side of the drill. The
dual markers mount on both sides, and include an
automatic sequence valve for operating alternate sides
on each pass.
Both marker include speed adjustments.
If ordered with a new drill, markers are factory-installed.
They may also be ordered later for field installation. Each
kit equips one drill.
Markers add weight to the drill, but only to the wing
section(s). The dual kit adds 1860 lbs (844 kg). The
single kit adds 930 lbs (422 kg). See page 40 for the
contribution to available down-pressure.
To maintain equal available force when a single marker is
installed, add one entire weight kit to the right wing,
populated with eight 100 pound (45 kg) weights.
Hitch Description
Part
Numbers
Large Strap 170-038A
Clevis 170-039A
Small Strap 170-059A
27061
1
2
3
1
2
3
Marker Kit Part Number
Single 113-814A
Dual 113-815A
20306