Safety decals and reflectors, 055c slow moving vehicle placard, 266c red reflectors – Great Plains V-300F Operator Manual User Manual
Page 10
6
V300 & V300F
Great Plains Manufacturing, Inc.
148-057M-A
11/15/2007
Safety Decals and Reflectors
Your implement comes equipped with all safety decals
and reflectors in place. They were designed to help you
safely operate your implement.
▲ Read and follow decal directions.
▲ Keep all safety decals and reflectors clean and legible.
▲ Replace all damaged or missing decals and reflectors.
Order new decals and reflectors from your Great Plains
dealer. Refer to this section for proper placement.
When ordering new parts or components, also request
corresponding safety decals.
To install new decals or adhesive reflectors:
1.
Clean the area where the decal is to be placed.
2.
Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
818-055C
Slow Moving Vehicle Placard
On back of seed box;
one total
838-266C
Red Reflectors
Rear face, outside ends of rear walkboard;
two total
23238
27169