Great Plains Max Cover Verti-Till Ripper Operator Manual - Manual (Page 31)

8/6/07 596-098M
29 Operating Instructions
Parking
Perform the following steps when parking the im-
plement. Refer to “Storage”, page 32, to prepare
for long-term storage.
1. Park implement on a level, solid area.
2. Lower implement until the weight is resting on
the transport lock channels or remove and
store the transport lock channels then lower
the implement until the shanks are resting on
the ground.
3. Securely block tires to prevent rolling.
4. Remove tongue jack from storage stob. Pin
jack on side of tongue. If ground is soft, place
a board or plate under jack.
5. Extend jack until tongue weight is off tractor
drawbar.
6. Unplug hydraulic hoses and wiring harness
from tractor. Do not allow hose ends or har-
ness ends to rest on the ground.
7. Remove hitch bolt and safety chain from trac-
tor drawbar.