Transport, Transport steps – Great Plains 4336 DH Operator Manual User Manual
Page 25
Great Plains Manufacturing, Inc.
Operating Instructions
21
05/22/2012
556-100M
Transport
Loss of Control Hazard:
Do not tow the disk harrow behind another implement on pub-
lic roads. Tow the disk harrow to the field with a separate vehi-
cle. The leading implement may not provide sufficient lateral
control of a trailing implement at highway speeds. The total
weight of the train can also exceed the steering and/or braking
capability of the tractor. The resulting accident could cause
serious injury or death.
Loss of Control Hazard:
Use an adequate towing vehicle. Never tow an implement that
weighs more than 150% of the towing vehicle (transport vehi-
cle must weigh at least 67% of implement). Ensure that the
towing vehicle is adequate for the task. Using an inadequate
tow vehicle is extremely unsafe, and can result in loss of con-
trol, serious injury and death.
See tables below for harrow transport weights.
Braking and Loss of Control Hazard:
Do not exceed 20 mph (32 kph). Slow down on rough roads.
Transport Steps
Know your implement weight. If tractor capabilities are
marginal, check actual weight of implement at a scale.
1.
Check that implement is securely hitched to a suffi-
cient tractor (page 13).
2.
Always use a locking-style hitch pin sized to match
holes in hitch and draw-bar, and rated for the load.
3.
Attach safety chain to tractor with enough slack to
permit turning (page 13).
4.
Verify correct operation of lights.
5.
Check that tires are properly inflated (page 33).
6.
Plan the route. Avoid steep hills.
7.
Always have lights on for highway operation.
8.
Do not exceed 32 kph (20 mph). Comply with all
national, regional and local laws when traveling on
public roads.
9.
Remember that the implement may be wider than
the towing vehicle. Allow safe clearance.