Great Plains 3P1006NT Operator Manual - Manual (Page 46)

42 3P1006NT Table of Contents Index Great Plains Manufacturing, Inc.
151-144M Table of Contents Index 2011-12-20
Acremeter inaccurate
Excess wheel slippage Check frame height, wheel axle position, tire
size and pressure. If correct, solution may be
to wait for drier conditions.
Passes misaligned. Check that planting passes are not leaving
gaps (under-reporting area) or causing
overlap (over-reporting area).
Wheel slippage is varying from
nominal. If variance is consistent, develop a correction
factor for your conditions.
Check that acremeter is for your drill. Activate display. Lower left corner must be
“568.7 revs/ac” or
“1405.3 revs/ha”.
Contact dealer if otherwise.
Acremeter battery failing Replace acremeter (page 29). Unit is sealed
and battery is not replaceable.
Problem Cause Solution